Download Eliwell Ewpc 901/t Manual

0807

  1. GENERAL DESCRIPTION The EWPC 901/A is a temperature con-troller specifically designed for refrigeration applications; it is designed to operate as a.
  2. 01 Italiano Eliwell. 01 - Controllore di temperatura 1 uscita. 01 - Temperature controller with single output. 01 - Temperaturregler mit 1 Ausgang.
The user has a display and four keys for

Apr 3, 2011 - Eliwell – replaces over 25 models from the EWTC, EWPC. EWPX, IC and ID. Please see the Universal-R Replacement Guide, section 7 of our.

instrument.
UP key
Increases the values
Scrolls through the menu items
fnc key
fnc
Accesses the setpoint
Accesses the menus
out
Ewpc
At start-up the instrument performs a
the leds blink, in order to verify their
ment has two main menus: the 'Machine
ACCESSING AND USING MENUS
can be accessed by pressing and quickly
menu) or by holding down the 'set' key
menu).
cated by the relevant label, just press the
You can now scroll through the contents
tions.
seconds (time-out) or if you press the
the display is confirmed and you return to
LED
Associated function
Relay 1
°C
IC 902
MACHINE STATUS MENU
To access the 'Machine Status' menu Press
If alarms are not present, the label 'SEt'
keys you can scroll through the other fold-
-Pb1: probe 1 value folder;
Set Setting
pressing and quickly releasing the 'set'
To display the Setpoint value press the
The value appears on the display.
and 'DOWN' keys within 15 seconds.
cannot be changed.
f nc
priate label appears, the value of the
probe associated to it is displayed.
(See Programming Menu)
the 'set' key for more than 5 seconds.
requested, (parameter 'PA1'), and (if the
folder will follow.
the 'UP' and 'DOWN' keys; the folders
If the password is wrong, the display will
To enter the folder, press 'set'. The label
scroll through the other parameters, use
parameter, press and release 'set', then
'DOWN' keys, and confirm with the 'set'
PLEASE NOTE: It is suggested to switch-off
time it is changed the configuration of the
on regulation and delay time occuring.
ON for relay ON, flashing for delay, disabled protection
ON for an active alarm
PASSWORD
parameters. In the standard configuration
To enable them (value≠0) and assign them
'Programming' menu, within the folder
If password is enabled, it will be request-
menu (see the 'Programming Menu' sec-
COPY CARD
to the TTL serial port which allows pro-
ters. The operation is performed as fol-
Download
Upload
parameters from the instrument.
This operation downloads to the instru-
The operations are performed accessing
selecting, according to the case, 'UL' or
firmed by pressing the 'set' key. If the
on the contrary, if it fails a 'n' will be dis-
NOTE:
• DOWNLOAD: Copy Card --> instru-
KEYBOARD LOCKING
abling the keyboard, by programming the
label). If the keyboard is locked, you can
pressing the 'set' key.
DIAGNOSTICS
the buzzer (if present) and by the led of
The alarm signal produced by a faulty
on the instrument display.
DISPLAY
E1

Download Eliwell Ewpc 901 T Manual

Advertisement

Related Manuals for Eliwell ic 902

  • Thermostat Eliwell IC 901 Manual
    Electronic thermostat with single output (3 pages)

Summary of Contents for Eliwell ic 902

Eliwell Ewpc 902 T

  • Page 1 IC 902 electronic thermostat with single output THE USER INTERFACE MACHINE STATUS MENU PASSWORD (See Machine Status Menu) The password “PA1”allow access to level 1 The user has a display and four keys for To access the “Machine Status” menu Press parameters.

  • Page 2: Technical Data

    Invensys for example, sensors. Controls Italy s.r.l. reserves the right to This means, for example, that sensor(s) make any changes or improvements with- error(s) shall be added to the instru- out prior notice. ment’s one. IC 902...
  • Page 3 • It is strongly recommended, anyway to switch off and switch on again the controller anytime parameters have been changed to prevent malfunctioning on configuration and/or ongoing timings SEt value press and release (single press) change SEt value Pb1 value Machine Status Menu Diagram IC 902...
  • Page 4 Wiring diagram WIRING (12 and 230V) 1 - 2 N.C. regulator relay output OUT IC 902 - 12 V 1 - 3 N.O. regulator relay output OUT 6 - 7 Power supply • model 230V: 3 VA max.
This entry was posted on 07.08.2019.